Filter
Top Products
User Manual version 2007
APOLLO 120/150 III
7-127
u VIDEO OFF METHOD
This determines the manner in which the monitor is blanked.
V/H
SYNC+Blank
This selection will cause the system to turn off the vertical
and horizontal synchronization ports and write blanks to the
video buffer. Blank Screen This option only writes blanks to
the video buffer. DPMS Select this option if your monitor
supports the Display Power Management Signaling (DPMS)
standard of the Video Electronics Standards to select video
power management values.
u SWITCH FUNCTION
You can choose whether or not to permit your system to
enter complete Suspend mode. Suspend mode offers greater
power savings, with a correspondingly longer awakening
period..
The choice: Break/Wake, Disabled.
Hot Key Function As Select Enabled if your system has a hot
key for soft power off.
The choice: Enabled or Disabled.
u HDD OFF AFTER
By default, this item is Disabled, meaning that no matter the
mode the rest of the system, the hard drive will remain ready.
Otherwise, you have a range of choices from 1 to 15 minutes
or Suspend. This means that you can elect to have your hard
disk drive be turned off after a selected number of minutes or
when the rest of the system goes into a Suspend mode.
u POWER BUTTON OVER RIDE
You could press the power button for more than 4 seconds
forces the system to enter the Soft-Off state when the
system has “hung.”
The choice: Soft-Off, Delay 4 Sec.