Filter
Top Products
User Manual version 2007
APOLLO 120/150 III
9-173
C: Wake-On-LAN
The Wake-On-LAN is a remote management tool with the
advantage to reduce system management workload. It
provides the capability to remotely power on the client
computers supporting Wake-On-LAN by simply sending a
“wake up packet”. After powering up the client systems, the
user is able to monitor the remote systems’ status and to
upload or download files to or from the clients. With this
feature, MIS persons can flexibly perform client maintenance
during off-hours; the Total Cost of Ownership (TCO) will be
thus lowered.
To use Wake On LAN function, the client system must have a
network card with chipset that supports the Wake-On-LAN
and an ATX power supply meeting 2.01 with at least 720mA
standby current is also required to support the Ethernet card
for this function. The APOLLO is a panel PC system with these
two features. To use the APOLLO Wake-On-LAN function,
please refer to the following;
1. Download the “Wake up packet”,
PCnet Family Software Magic Packet Utility. This utility is
downloadable from AMD website at
http://www.amd.com/us-en/Networking/ProductInformatio
n/0,,50_2330,00.html
Or refer to the Magic Packet™ Technology at AMD website
for how to write your own wake-up program.
http://www.amd.com/us-en/Networking/TechnicalResource
s/0,,50_2334_2481,00.html
2. BIOS Setting
Enter the \POWER MANAGEMENT SETUP\PM WAKE UP EVENTS to
enable the MACPME POWER UP CONTROL