Filter
Top Products
User Manual version 2207
APOLLO 120/150 III
5-
52
The APOLLO 120/150 III consists of a Celeron/ Pentium
®
III
multimedia motherboard with an adequate CPU and relevant
SDRAM on it. The system control board and other internal
devices such as expansion card, HDD and power supply are
already housed in a plastic rear cover. The system’s
performance depends on the installed CPU and the capacity
of the system memory and hard disk drive. In some
circumstances, you might intend to upgrade or maintain the
system. By removing the rear cover and the metal covers,
the internal components such as CPU, SDRAM, HDD, internal
FDD, CD-ROM and power supply can be easily accessed for
maintenance and upgrade.
The APOLLO is composed of 9 major modules. The
installation procedure is also listed as below.
1. Motherboard module
2. HDD module
3. LCD module
4. Front bezel module
5. CD-ROM module
6. Power supply module
7. Expansion slot module
8. Back panel module
9. Stand module
To disassemble the system module for maintenance, the
procedure is from step 9 to 1.