Filter
Top Products
CHAPTER 1
LaserWriter Select 310 Hardware
8
Status Lights
Status Lights 1
The LaserWriter Select 310 printer has three colored lights on the left side of the printer.
These lights indicate what the printer is doing. Figure 1-5 shows a view of the status light
symbols, and Table 1-4 describes the functions of the lights.
Figure 1-5
Status lights
Table 1-4
Status light messages
Light Light’s state Printer’s state
Ready/in use
Green
On
Off
Flashing
The printer is ready to use.
The printer cannot print because there is an error
condition, or the printer cover is open.
The printer is warming up or is processing data for
the next print job.
Paper out
Amber
On
Off
Flashing
Paper tray is empty or has been removed from
the printer.
There is an adequate supply of paper in the
paper tray.
The printer is in manual-feed mode and is ready for
the next sheet of paper.
Paper jam
Amber
On
Off
Flashing
There is a paper jam.
Paper is feeding correctly through the printer.
The printer requires service.
NOTE
If both the Paper out and Paper jam lights flash or stay on, the printer
requires service.
Green Amber Amber
Ready/
In use
Paper
out
Paper
jam