![](http://pdfasset.owneriq.net/5/97/5976dcc5-0c64-4047-9a91-30d5e763d322/5976dcc5-0c64-4047-9a91-30d5e763d322-bgce.png)
Upgrades Communications Card Installation - 15
7 Insert the card connector
into the communications
slot.
Note:
Be sure the hook
remains against the
outside of the logic
board fence.
8 Reset the logic board
following the procedure
in “Logic Board Reset”
in the Additional
Procedures chapter.
Communication slot
Card connector
Hook
Logic Board
Fence