Filter
Top Products
MBOX EXTREME™ MEDIA SERVER USER MANUAL
14 02.9800.0001
System Connection Procedure
Once the case is set up and in place, connect to your control and video output devices.
To connect to the system:
Step 1. For DMX512 controllers:
a. At Data I/O unit, connect console or DMX512 controller to DMX connector as required.
Figure 2-4: Connecting DMX512 Control Devices
Step 2. For Art-Net consoles:
a. At Data I/O unit, connect console to any Ethernet connector (Figure 2-4).
b. If desired, connect additional Ethernet devices (such as a media server, network switch
or dimmer rack) to additional Ethernet ports provided by the Ethernet Hub (Figure 2-5).
Figure 2-5: Connecting Additional Devices to Ethernet Hub
DATA I/O
ETHERNET
DMX
ETHERNET HUB
HUB POWER