Open as PDF
Using Your Display Stands 25
Attaching the Flip-Out Stand
If necessary, remove the desktop stand.
For instructions, see “Removing the Desktop Stand” on page 22.
2 Hook the three plastic tabs on the top cover of the ﬂip-out stand into the three openings on
the back center area of the display.
3 Place the bottom part of the cover against the display and screw in the two plastic
Use a coin or ﬂathead screwdriver to tighten the screws. Don’t overtighten the screws; you
might strip the threads.
4 Flip out the stand and place the display with the stand on a ﬂat surface, such as a table or
5 Connect the DVI and USB cables to the computer.
6 Connect the keyboard and mouse to the USB ports on the display, if desired.
7 If desired, attach a locking cable to the security slot on the back of the display.
8 Plug in the monitor’s power cord.
Removing the Flip-Out Stand
1 Place a towel or cloth on a clean, ﬂat surface to protect the display once it’s removed from
2 Choose Shut Down from the Special menu to turn off your computer and monitor.
3 If necessary, lift the display up slightly and press the power button (®) to turn the display
First, hook the
onto the back
of the display.