Filter
Top Products
46
Item Description
MY BUTTON
This item is to assign one of the following functions to MY BUTTON
1 and 2 on the remote control (
6).
Choose 1 or 2 on the MY BUTTON menu using the ◄/► button
rst. Then using the ▲/▼ buttons sets one of the following functions
to the chosen button.
• COMPUTER1: Sets port to COMPUTER IN1.
• COMPUTER2: Sets port to COMPUTER IN2.
• COMPONENT: Sets port to COMPONENT (Y, C
B/PB, Cr/Pr)
• S-VIDEO: Sets port to S-VIDEO.
• VIDEO: Sets port to VIDEO.
•
INFORMATION: Displays the INPUT -INFORMATION-
(
48)
(
when
an input signal is found)
or nothing.
While the dialog is shown, pressing again the button closes the
dialog.
• MY MEMORY: Loads one of adjustment data stored (
30).
When more than one data are saved, the adjustment changes
every time the MY BUTTON is pushed.
When no data is saved in memory, the
dialog "No saved data" appears.
When the current adjustment is not
saved to memory, the dialog as shown
in the right appears.
If you want to keep the current adjustment, please press the
◄ button to quit. Otherwise loading a data will lose the current
adjusted condition.
• PICTURE MODE: Changes the PICTURE MODE (
26).
• FILTER RESET: Displays the lter time reset conrmation dialog
(
45).
• AV MUTE: Turns the picture and audio on/off.
• TEMPLATE: Makes the template pattern selected to the
TEMPLATE item (
43) appear or disappear.
MY SOURCE
Using ▲/▼ buttons selects the picture input port to be selected with
pressing the MY SOURCE/DOC.CAMERA button on the remote control.
Select the picture input that is connected with a document camera.
COMPUTER (IN)1
ó
COMPUTER (IN)2
VIDEO
ó
S-VIDEO
ó
COMPONENT
SERVICE
Selecting this item displays the SERVICE menu.
Select an item using the ▲/▼ buttons, and press the ► button or
the ENTER button to execute the item.
FAN SPEED
ó
AUTO ADJUST
ó
GHOST
ó
FILTER MESSAGE
ó
KEY LOCK
ó
FOCUS LOCK
FACTORY RESET
ó
I NFORMATION
ó
REMOTE FREQ.
ó
REMOTE RECEIV.
OPTION menu
OPTION menu (continued)
(continued on next page)