Filter
Top Products
8 Slide the drive carrier back into the expansion bay.
9 While holding the drive in place with one hand, connect a power cable and the connector
cable to the back of the device.
You can temporarily slide the device slightly forward if you need more room to attach the
cables to the back of the device.
SCSI device ATA device
While holding the
drive in place, attach
the SCSI ribbon cable
(not included with
your computer) and
the power cable to the
back of the drive.
While holding the
drive in place, attach
the ATA ribbon cable
and the power cable
to the back of the drive.
64 Chapter 3