Filter
Top Products
ARTDio IPP 1000 Series
23
Dialing Procedures
5-6 Operator
Setting the operator code
Select ‘ADVANCED \ NUMBERING PLAN’ on the Web Management Page
See the code in the ‘Operator Code’ field of the Access Codes section
Alternately in the ‘Other Setting’ section, enter an extension in the ‘Assign Operator to’
field
Click ‘Apply’
Parameter Command
Control Select “Enable”
Inter Office Extension #
Local IPP Ext. Local IPP phone number + Ext.
Any IPP unit Any IPP unit phone number + Ext.
Any IPP unit Any IPP phone number
Forward To：
Any IPE unit via IPN Any IPE unit access code number
Offnet To：
Any phone number in the Call
Forward, ‘Offnet To’ field
Enter the desired phone number in the field
Operator Call Forward
The ‘OPERATOR’ function of the IPP will forward calls to：
Any internal extension
Any IPP unit extension
Any IPE unit via IPN
Any phone number