Filter
Top Products
IPS-2101h User Manual
12
6. WEB Configuration
Press the Status Button on the IPS-2101h, and pick up the handset, you will be able to hear the
voice prompt indicating the IP address of your IPS-2101h. If the IP address you hear is 0.0.0.0,
then there is no IP address available or the internet connection is bad. Please refer to “5.
Network Settings Using Status Button” to configure the IP address to your IPS-2101h.
Once the web browser connects to the IPS-2101h, you will see the login window as:
The IPS-2101h web configuration password comes with two categories: User password and
Administrator password.
• The default User Password is 1234.
• The default Administrator Password is 12345678.
Enter one of the passwords and click the “Login” button.
The following are the definitions for configuration parameters in the Web Configuration Page:
6.1 Network Settings
Network Settings
Fields Description
IP Type
Select the corresponding option based on your network environment:
z Static
Select this option to allow users to configure the Local IP address,
Subnet Mask, Router IP, and DNS IP addresses for the IPS-2101h.
z DHCP
Select this option to allow the IPS-2101h automatically acquires an IP
address assigned from the DHCP server.
z PPPoE
If you are a PPPoE user, please select this option and then enter the
PPP ID and PPP PIN with PPPoE account and password. The ISP will
automatically assign all the required IP parameters to IPS-2101h.