Filter
Top Products
IPS-2101h User Manual
7
3.2 Status Button Functions
There is a Status Button/Indicator on IPS-2101h indicating different status:
Safe Mode:
To enter to the safe mode, you can press the Status Button, and then plug into the power. The
Status Indicator will flash with green and orange lights. It is used when reloading the firmware
from failed firmware.
Voice Prompt IP:
When the phone hangs up, press the Status Button and then pick up the phone. You will hear
the voice prompt IP telling you the current IP address of you IPS-2101h.
Setup status indication:
When the phone hangs up, pick up the handset and then press 1234. The Status Button will
blink with green light, indicating that you are now in the configuration mode.
Registration status indication:
The Status Button will blink with red lights when rebooting, registering, or register failed,
Firmware updating indication:
Right after the firmware has been uploaded, the IPS-2101h will update the new firmware and
the Status Button will blink with green and red lights. If IPS-2101h failed to reboot after the
firmware updated, please update the firmware again in the safe mode.
System booting indication:
When the IPS-2101h is rebooting, the Status Button will blink with orange lights.
3.3 Status Indicator Functions
Light Description
Power ON (red) Power supply ok.
Hook (green) Off-hook when in the IP mode.
PSTN (green) Off-hook when in the PSTN mode.
LAN Act/Link (green) Green when connected, blinking when receiving or transmitting data.