Filter
Top Products
2
Important! – Please Read This Manual Before Installing!
Congratulations on your purchase of a Voyager AOM681 LCD Observation Monitor.
With proper installation and use, your AOM681 is designed to provide you with years of
trouble-free operation. This manual contains important information required to properly
install and operate the unit. Please read this manual thoroughly before beginning.
All Voyager Observation products are strictly intended to be installed as a supplement aid
to standard rear-view mirror systems that may already exist in your vehicle. Voyager
observation products are not intended for use as substitutes for rear-view mirror devices,
or for any other standard motor vehicle equipment required to be installed on vehicles by
law.
While Voyager observation products contribute to improving the vehicle operator’s field
of view, these products are no substitute for proper defensive driving techniques and
observance of traffic laws and motor vehicle safety regulations.
Warnings!
Installation Location
It is unlawful in most jurisdictions for a person to drive a motor vehicle equipped with a
television viewer or screen located at any point forward of the back of the driver’s seat or
in any location that is visible, directly or indirectly, to the driver while operating the
vehicle. The AOM681 product is designed to be used primarily as a rear observation
device in conjunction with closed circuit cameras. In any installations where the
AOM681 is used to display television broadcasts or recorded video playback, installation
location must adhere to local laws and regulations.
Tampering
To prevent electrical shock, DO NOT OPEN THE MONITOR CASE. There are
potentially harmful voltages inside the monitor. There are no user serviceable parts
inside. If evidence of tampering is detected, the warranty will be considered void.
Moisture
Your Voyager AOM681 was designed to be water-resistant. While it will withstand short
periods of exposure to moisture, this product does contain sensitive electronic
components and exposure to moisture should be limited by the user / installer. This
product is not designed for applications where constant exposure to moisture or
immersion can be encountered. This unit should NEVER be cleaned with a power
washer or used where direct power washer spray may be encountered.