Filter
Top Products
This command is used to forward frame and learn SA into ARL table
Format vlan ingress bypass
Mode Global Config
10.4.2.4 vlan port
This command is used to configure 802.1Q port parameters for vlans
1) vlan port all
This command is used to configure all ports
vlan port all port-configure
This command is used to configure ports in a specific vlan
Format vlan port all port configure <vlan-ID>
Mode Global Config
vlan port all protected
This command is used to configure protected ports
Format vlan port all protected {enable|disable}
Mode Global Config
vlan port all pvid
This command is used to configure port pvid
Format vlan port all pvid <vlan-ID>
Mode Global Config
2) vlan port ports
This command is used to configure multiple ports
vlan port ports port-configure
This command is used to configure ports in a specific vlan
Format vlan port ports port-configure <vlan-ID>
Mode Global Config
vlan port ports protected
This command is used to configure protected ports
Format vlan port ports protected {enable|disable}
Mode Global Config
vlan port ports pvid
This command is used to configure port vid
Format vlan port ports pvid < vlan-ID>
Mode Global Config
10.4.2.5 vlan lag
This command is used to configure lag to a special vlan
1) vlan lag vlan < vlan-id> exclude
25
This command is used to remove lag from a vlan
Format vlan lag vlan < vlan-ID> exclude lags <lag-ID>
Mode Global Config
2) vlan lag vlan <vlan-ID> untagged
This command is used to set to untagged lag.
Format vlan lag vlan <vlan-ID> untagged lags <lag-ID>
Mode Global Config
3) vlan lag vlan <vlan-ID> tagged
This command is used to set to tagged lag.
Format vlan lag vlan <vlan-ID> tagged lags <lag-ID>
Mode Global Config
10.4.3 Bridge
This command is used to configure switch aging time
Format bridge aging-time <0-1048575>
Mode Global Config
10.4.4 lacp-syspri
This command is used to configure lacp system priority
Format lacp-syspri system-priority <0-65535>
Mode Global Config
118 Asante IntraCore IC3624/48 User’s Manual