Filter
Top Products
This command creates rmon alarm entry.
Format rmon alarm index < 1..65535 >interval<0..3600>interface<port
number>counter<1..17>sample{absolute|delta}start{rasing|falling|all}rthreshol
d<0..65535>fthreshold<0..65535> reindex <0..65535> feindex<0..65535>
owner< WORD>
Mode Global Config
e.g. Switch(Config)# RMON alarm index 1 interval 10 interface counter 1
sample delta start all rthreshold 100 fthreshold 10 reindex 1 feindex 0 owner
test
10.4.22.3 rmon del
1) rmon del event
This command deletes rmon event entry.
Format rmon del event index< 1..65535 >
39
Mode Global Config
2) rmon del alarm
This command deletes rmon alarm entry.
Format rmon del alarm index< 1..65535 >
Mode Global Config
10.4.23 access list commands
Note: This commands only support on G24-PORTS 100BASETX + 2 GIGABIT
COMBO PORTS LAYER 2+ MANAGEMENT SWITCH/G24 GIGABIT PORTS
WITH 2 SHARED MINI-GBIC SLOTS/G44 GIGABIT PORTS WITH 4
SHARED MINI-GBIC SLOTS L2 MANAGEMENT SWITCH/G48 100BASETX
+ 4 GIGABIT COMBO WITH 2 SHARED MINI-GBIC SLOTS LAYER 2+
MANAGEMENT SWITCH.
10.4.23.1 access-list name <WORD> add
This command creates a new access-list.
Format access-list name <WORD> add priority <1-65535>
Mode Global Config
10.4.23.2 access-list name <WORD> action
1) access-list name <WORD> action deny
This command denies an ACL entry.
Format access-list name <WORD> action deny
Mode Global Config
2) access-list name <WORD> action permit
This command permits an ACL entry and queue 1-4 will assign priority queue
when rule activated.
Format access-list name <WORD> action permit {<cr>|queue <1-4>}
Mode Global Config
10.4.29 access-list name <WORD> clear
This command clears ACL entry contents.
1) access-list name <WORD> clears SRC IP
This command clears the source IP/subnet mask filter.
Format access-list name <WORD> clear SRC IP
Mode Global Config
2) access-list name <WORD> clears DST IP
This command clears the destination IP/subnet mask filter.
Format access-list name <WORD> clear DST IP
Mode Global Config
3) access-list name <WORD> clear L4port
access-list name <WORD> clear L4port SRC port
This command clears TCP/UDP source port filter.
Format access-list name <WORD> clear l4port SRC port
Mode Global Config
access-list name <WORD> clear l4port DST port
130 Asante IntraCore IC3624/48 User’s Manual