Filter
Top Products
Appendix B: Specifications
The sections below list the features and product specifications for the IntraCore IC3624/48 switch.
Interfaces
- 24/48 RJ-45 connectors for 10/100 BASE-T
- 2/4 RJ45 Combo Ports for 1000 BASE T with 2
MiniGIBC/SFP Slots
- IEEE Auto Negotiation or manual configuration
- Reset button
- RS232 Console port
Status Indicators
- Power Operating status of the unit
- LED for port link/activity
Performance Specifications
- Wire-speed, Gigabit Ethernet Switch at 6.5Mpps
- Less than 20μs for 64-byte frames latency
- 4 Priority Queue with Weighted Round Robin (WRR)
Scheduling
- 8000 MAC address with auto-learning and aging
- Single-chip switch fabric non-blocking with on-board frame buyers
Management Specifications
- IEEE 802.1x Standard Port Access Control
- IEEE 802.1D Spanning Tree Protocol
- IEEE 802.1.W Rapid Spanning Tree Protocol
- IEEE 802.1 S Multiple Spanning Tree Protocol
- IEEE 802.1Q Tag VLAN (Up to 64)
- Port-based QoS (options High/Normal)
- Port Trunking - Manual as per IEEE802.3ad Link
Aggregation
- Port Mirroring
- System Log
- RFC 1157 SNMP v1, v2c
- RFC 1643 Ethernet Interface MIB
- RFC1493 Bridge MIB
- Web-based (IE, Mozilla, MacOS-Safari)
- Password access control
- Upgradeable firmware
Standards Compliance
- IEEE 802.3 10BASE-T Ethernet
- IEEE 802.3u 100BASE-TX Fast Ethernet
- IEEE 802.3ab 1000BASE-T Gigabit Ethernet
- IEEE 802.3x full-duplex flow control
- IEEE 802.3z 1000BaseSX over 50 micron multi-mode fiber
- TCP/IP, CSMA/CA with ACK
- FCC Class A, CE Mark
139 Asante IntraCore IC3624/48 User’s Manual