Filter
Top Products
Installation
Page 2-12
Powering on the Switch
This section describes how to power on the FS4004DS and the
FS4008DS Fast Ethernet Switch.
FS4004DS
The FS4004DS’s may be turned on with or without LAN segment
cables connected.
To power on the FS4004DS:
1 Connect one end of the power cord (supplied) into
the AC power connector on the FS4004DS’ back
panel.
2 Connect the power cord to a local power source
outlet.
Note: There is no power switch on the FS4004DS.
The FS4004DS is automatically powered on as soon as
the power cord is connected to the Switch and to a
power outlet.
The FS4008DS’s power supply adjusts to the local
power source automatically. .
FS4008DS
The FS4009DS may be turned on with or without LAN segment cables
connected
To power on the FS4008DS:
1 Connect one end of the power cord (supplied) into
the AC power connector on the FS4008DS’ back
panel.
2 Connect the power cord to a local power source
outlet.
3 Turn the power switch to the “on” position.
The FS4008DS’s power supply adjusts to the local
power source automatically. .
FRCH1Book Page 12 Thursday, September 25, 1997 11:23 AM