Asante Technologies FS4004DS Switch User Manual


 
Page A-1
A
Troubleshooting
Table A-1 describes how to troubleshoot problems with your network
and/or the Switch by monitoring the Switch’s LEDs.
Table A-1 Troubleshooting
Problem Action
Power LED is off Make sure the power adapter is connected to
the power outlet and is properly inserted into
the power connector on the switch.
Determine if the power outlet is functional by
plugging another device into the receptacle.
Collision LED is
blinking constantly
Collisions are normal in Fast Ethernet net-
works; however, excessive collisions may indi-
cate that your network is overly congested.
Make sure the workstation cables do not
exceed the maximum length of 100 meters.
Make sure the workstation cables meet EIA/
TIA 568B specifications for Category 5 wiring.
Make sure the total network diameter does not
exceed the maximum distance.
Make sure there are no faulty Fast Ethernet
adapters or other equipment on the network.
FRCH1Book Page 1 Thursday, September 25, 1997 11:23 AM