Filter
Top Products
Asoka® User’s Guide
PlugLink 9950 Cable/ DSL Router PL9950-BBR
Page 16 of 43
2. Selecting your Internet Service Provider (ISP) Connection Type to Static IP:
A static IP address
connection type is less common than other connection types. If your ISP uses static IP
addressing, you will need your IP address, subnet mask, and ISP gateway address. This
information is available from your ISP or on the paperwork that your ISP left with you. Type in
your information. Click Apply.
Figure 8-3: Static IP Screen
3. Selecting your Internet Service Provider (ISP) Connection Type to PPPoE: Most DSL providers
use PPPoE as the connection type. If you use a DSL modem to connect to the Internet, your
ISP may use PPPoE to log you into the service. If you have an Internet connection that
doesn’t require a modem, you may also use PPPoE. Type in your information and click Apply.
Figure 8-4: PPPoE IP Screen
Setting Domain Name Server (DNS) Information
After you have selected and configured your connection type, you will need to set the DNS
Server information.
1. Under the WAN sub menu, click on DNS.
2. Enter the DNS information provided to you by your ISP and click Apply.