Filter
Top Products
Asoka® User’s Guide
PlugLink 9950 Cable/ DSL Router PL9950-BBR
Page 24 of 43
Figure 10-5: URL Filter Settings Page
Configuring Internal Forwarding Settings
The Virtual Servers function will allow you to route external (Internet) calls for services such as a
web server (port 80), FTP server (port 21), or other applications through your PL9950-BBR to your
int ernal network. Since your internal computers are protected by a firewall, computers outside
your network (over the Internet) cannot get to them because they cannot be ‘seen’. A list of
common applications has been provided in case you need to configure the Virtual Server
function for a specific application. If you application is not listed, you will need to contact the
application vendor to find out which port settings you need.
To configure Virtual Servers, click on Virtual Server under NAT in the Sub Menu.
1. Enter the IP address
2. Enter a private port number
3. Click Enable
4. To manually configure the Virtual Server, select Connection Type
5. Enter in a public po rt
6. Click Enable
7. Click Apply