Filter
Top Products
2-262-26
2-262-26
2-26
Chapter 2: BIOS setupChapter 2: BIOS setup
Chapter 2: BIOS setupChapter 2: BIOS setup
Chapter 2: BIOS setup
2.5.12.5.1
2.5.12.5.1
2.5.1
APM configurationAPM configuration
APM configurationAPM configuration
APM configuration
This menu shows the Advanced Power Management (APM) configuration
settings. Select an item then press <Enter> to display a pop-up menu with
the configuration options.
Select Menu
Item Specific Help
Restore on AC Power Loss [Power Off]
Suspend Mode [Disabled]
Switch Function [Break/Wake]
Hot Key Funtion As [Power Off]
Power Button Override [Instant Off]
RING Power Up Control [Disabled]
MACPME Power Up Control [Disabled]
PCIPME Power Up Control [Disabled]
PS2 KB Wakeup from S3/S4/S5 [Ctrl+Alt+B_Space]
PS2 MS Wakeup from S3/S4/S5 [Disabled]
Power On By RTC Alarm [Disabled]
x Month Alarm NA
x Day of Month Alarm 0
x Time(hh:mm:ss) Alarm 0:0:0
APM Configuration
Restore on AC Power Loss [Power Off]Restore on AC Power Loss [Power Off]
Restore on AC Power Loss [Power Off]Restore on AC Power Loss [Power Off]
Restore on AC Power Loss [Power Off]
Allows you to set whether or not to reboot the system after power
interruptions. [Power Off] leaves your system off while [Power On] reboots
the system. [Last State] sets the system back to the state it was before
the power interruption. Configuration options: [Power Off] [Power On]
[Last State]
Suspend Mode [Disabled]Suspend Mode [Disabled]
Suspend Mode [Disabled]Suspend Mode [Disabled]
Suspend Mode [Disabled]
Sets the time period before the system goes into suspend mode.
Configuration options: [Disabled] [1 Min] [2 Min] [4 Min] [8 Min] [12 Min]
[20 Min] [30 Min] [40 Min] [1 Hour]
Switch Function[Break/Wake]Switch Function[Break/Wake]
Switch Function[Break/Wake]Switch Function[Break/Wake]
Switch Function[Break/Wake]
Enables or disables the Break/Wake switch function.
Configuration options: [Disabled] [Break/Wake]
Hot Key Function [Power Off]Hot Key Function [Power Off]
Hot Key Function [Power Off]Hot Key Function [Power Off]
Hot Key Function [Power Off]
Allows you to select the hot key function.
Configuration options: [Disable] [Power Off] [Suspend]