Filter
Top Products
2-362-36
2-362-36
2-36
Chapter 2: BIOS setupChapter 2: BIOS setup
Chapter 2: BIOS setupChapter 2: BIOS setup
Chapter 2: BIOS setup
Supervisor Password [Clear]Supervisor Password [Clear]
Supervisor Password [Clear]Supervisor Password [Clear]
Supervisor Password [Clear]
User Password [Clear]User Password [Clear]
User Password [Clear]User Password [Clear]
User Password [Clear]
These fields allow you to set passwords.
To set a password:
1. Highlight an item then press <Enter>.
2. Type in a password using eight (8) alphanumeric characters, then
press <Enter>.
3. When prompted, confirm the password by typing the exact characters
again, then press <Enter>. The password field setting is changed to
[Set].
To clear the password:
1. Highlight the password field, and press <Enter> twice. The following
message appears:
“PASSWORD DISABLED!!! Press any key to continue...”
2. Press any key to return to the menu.
A note about passwordsA note about passwords
A note about passwordsA note about passwords
A note about passwords
The Supervisor password is required to enter the BIOS Setup program
preventing unauthorized access. The User password is required to boot the
system preventing unauthorized use.
2.6.42.6.4
2.6.42.6.4
2.6.4
SecuritySecurity
SecuritySecurity
Security
Security
Supervisor Password Clear
User Password Clear
Password Check [Setup]
Select Menu
Item Specific Help
Supervisor password
controls full
access. <Enter> to
change password.