Filter
Top Products
Chapter 2: Hardware setup
2-12
2.5.2 Installing a 5.25-inch drive
To install a 5.25-inch drive:
1. Remove the metal cover of
the bay where you wish to
install the drive by pulling
the cover outward.
2. Pull and swing the left edge of the front panel outward.
3. Unhook the hinge-like tabs from the holes on the right side of the front
panel to completely detach the front panel assembly from the chassis.
Hinge-like tab
2
3
1
Do not use too much force when removing the front panel assembly..