Filter
Top Products
Chapter 2: Hardware setup
2-22
2.8 Cable connections
2.8.1 Motherboard connections
The AP1710-S5 chassis includes the power and signal cables that you
need to connect to the motherboard, SCSI backplane and to the devices
that you will install.
Most of the cables for the chassis kit are already connected upon
shipment. When installing system devices and connecting cables,
make sure that all cables are routed properly for better system stability
and performance. Refer to the picture below when arranging cables.
Refer to the motheboard user guide for detailed information on the
connectors.
1. Chassis intrusion
2. Chassis fan
3. 20-pin system panel
4. SMBus panel to backplane
5. Front USB connector
6. Floppy disk drive
Standard cables connected to the motherboard
7. Secondary IDE
8. Primary IDE
9. HDD cable
10. 24-pin ATX power
11. 8-pin 12V AUX power
12. SCSI controller
1
7
9
4
3
2
6
5
8
11
10
12