Filter
Top Products
19
IV. Hardware Setup
AP200 Hardware Reference Guide
IV. HW Setup
Motherboard
Stabilizing Link Bar
The stabilizing link bar needs to be removed in order to access the mother-
board or remove the 3.5” device cage. To remove the stabilizing link bar,
grasp the bar at the back end with the right hand and with the right thumb
press the back of the chassis towards your fingers (or using the palm of your
left hand, press on the back of the chassis). The bar then releases from the
latch and swings outward.
Press here with your
thumb or other hand.
Grab here and pull
the bar outward.
Chassis Side Interior
4-2. Motherboard
Read the motherboard User’s Manual for details.
Motherboard Screws
Screw the motherboard as circled. Be
careful not to overtighten the screws. Do-
ing so may damage your motherboard.
Motherboard in the Chassis