Filter
Top Products
GigaX Centralized Network Management User’s Manual 13
English
Figure 3.3. Available Switches
3. Select the proper NIC at the same network with the switch, then click on the
Discovery icon in the tool bar. After the discovery is done, the left frame of
the window will show the MAC addresses of the switches discovered by the
CNM as Figure 3.3.
4. Select the switch you want to manage by clicking on the MAC address, then
you can start to configure the switch by CNM.
5. If the CNM cannot discover the switch you want to manage, please repeat
step 1 to 4 again.
Note: The switch must be powered on and connect to your network before
starting the CNM.