Asus WL-330G Network Card User Manual


 
1-4
Chapter 1: Product introduction
1.3.3 Rear view
Ethernet port. This port connects the
supplied RJ-45 plug and cable.
DC IN socket. This socket connects
the power adapter plug.
Reset button. Press this button for
more than five seconds (in AP or
Ethernet mode) to load the default
values. In Ethernet adapter mode,
press this button for less than five
seconds to connect to the first
saved wireless connection in the
profile table. See page 3-15 for
the reset button function in
Ethernet mode.
1.3.2 Bottom view
Mounting hook. Use the mounting
hook to install the device on
concrete or wooden surfaces
using a roundhead screw.
Air vents. These vents provide
ventilation to the device.
Mode switch. Allows you to switch
the device from AP mode to
Ethernet adapter mode, or vice
versa.
Mounting
hole
Mode
switch
Air vents
Ethernet port
DC IN socket
Reset button
AP mode
Ethernet adapter mode