Filter
Top Products
ASUS CUC2000 User’s Manual 19
3. HARDWARE SETUP
Motherboard Settings
3. H/W SETUP
3) Safe Mode Setting (SAFE_MODE)
Usually processors have locked frequency multiples. In this case, there is no way
to exceed the specified multiple whether through motherboard settings or BIOS
setup. With unlocked processors, exceeding the specified multiple is possible
through BIOS setup. Exceeding the specified multiple may result in hanging dur-
ing bootup. If this occurs, enable Safe Mode to force a multiple of 2 and 100MHz
FSB to enter BIOS setup to correct the problem.
Setting SAFE_MODE
Normal [1-2] (default)
Safe Mode [2-3]
CUC2000
®
CUC2000 Safe Mode Setting
Normal
(Default)
Safe Mode
1
2
2
3
SAFE_MODE
2) USB Device Wake Up (USBPWR)
This allows you to disable or enable the USB device power up function. Set this
jumper to Enable if you wish to use your USB device to wake up your computer.
This feature requires an ATX power supply that can supply at least 2A on the
+5VSB lead. The default is set to Disable because not all computers have the
appropriate ATX power supply. Your computer will not power ON if you set this
to Enable and do not have the appropriate ATX power supply. NOTE: This jumper
must be set in conjunction with Wake On USB Device in 4.5.1 Power Up Control.
Setting USBPWR
Disable [1-2] (default)
Enable [2-3]
CUC2000
®
CUC2000 USB Device Wake Up
Disable
(Default)
Enable
1
2
2
3
USBPWR