Filter
Top Products
ASUS CUC2000 User’s Manual 73
4. BIOS SETUP
4. BIOS SETUP
Power Up Control
Wake On PS2 KB/PS2 Mouse [Disabled]
Set this field to [Enabled] if you wish to use your PS2 keyboard, PS2 mouse, or
Consumer IR device to power up your computer. This feature requires an ATX power
supply that can supply at least 300mA on the +5VSB lead. The default is set to
[Disabled] because not all computers have the appropriate ATX power supply. Your
computer will not power ON if you set this to [Enabled] and do not have the appro-
priate ATX power supply. Configuration options: [Disabled] [Enabled]
Wake Up By Keyboard [Space Bar]
When the previous setup item Wake On PS2 KB/PS2 Mouse/CIR is enabled, you
may specify the key(s) to press to power up the computer. Configuration options:
[Space Bar] [Ctrl-Esc] [Power Key]
Wake On USB Device [Disabled]
This field sets the way you may use your USB device/s, if any, to power up the
computer. This feature requires an ATX power supply that can supply at least 2A on
the +5VSB lead. The default is set to [Disabled] because not all computers have the
appropriate ATX power supply. Your computer will not power ON if you set this to
[Enabled] and do not have the appropriate ATX power supply. NOTE: This jumper
must be set in conjunction with 2) USB Device Wakeup in 3.4 Motherboard Set-
tings. Configuration options: [Disabled] [Enabled]
Automatic Power Up [Disabled]
This allows an unattended or automatic system power up. You may configure your
system to power up at a certain time of the day by selecting [Everyday] or at a
certain time and day by selecting [By Date]. Configuration options: [Disabled] [Ev-
eryday] [By Date]