Asus DSBF-DE/SAS Personal Computer User Manual


  Open as PDF
of 206
 
ASUS DSBF-DE Series 5-47
6. Repeat step 5 to add the other disks to the volume.
7. When done, press <C> to create the array, then select Save changes then
exit this menu.
By default, the RAID Disk eld shows No before array creation. This eld is
grayed out under the following conditions:
• The disk does not meet the minimum requirements for use in a RAID array.
• The disk is not large enough to mirror existing data on the primary drive.
• The disk has been selected as the Hot Spare for the RAID array.
• The disk is already part of another array.
9. The utility creates the array.
Create and save new array?
Cancel Exit
Save changes then exit this menu
Discard changes then exit this menu
ExittheCongurationUtilityandReboot
LSILogicCongUtilityv6.08.05.00(2006.08.02)
Processing...may take up 1 minute
Creating RAID array
 previous next