Filter
Top Products
ASUS DSBF-DE Series
2-1
2.1 Before you proceed
Take note of the following precautions before you install motherboard components
or change any motherboard settings.
• Unplug the power cord from the wall socket before touching any
component.
• Use a grounded wrist strap or touch a safely grounded object or
a metal object, such as the power supply case, before handling
components to avoid damaging them due to static electricity.
• Hold components by the edges to avoid touching the ICs on them.
• Whenever you uninstall any component, place it on a grounded
antistatic pad or in the bag that came with the component.
• Before you install or remove any component, ensure
that the power supply is switched off or the power cord is detached from
the power supply. Failure to do so may cause severe damage to the
motherboard, peripherals, and/or components.
®
DSBF-DE Series Onboard LED
ON OFF
SB_PWR1
Standby
Power
Powered
Off
If the ATX12V2 connector is not connected, the REAR_FAN1/2,
FRNT_FAN1/2/3/4, and FBD_FAN1 will not work.
®
DSBF-DE Series SAS LED
ON OFF
LED1
Standby
Power
Powered
Off
This LED is for DSBF-DE/SAS model only, indicating that if the LSI SAS1068
chipset is working normally.