Asus K8V-F Computer Hardware User Manual


 
1-18
K8V-F
®
K8V-F Floppy Disk Drive Connector
FLOPPY
NOTE: Orient the red markings on
the floppy ribbon cable to PIN 1.
PIN 1
2. Auxilliary connector (4-pin AUX)
This connector allows you to receive stereo audio input from sound sources.
®
®
K8V-F Internal Audio Connector
AUX (White)
Right Audio Channel
Left Audio Channel
Ground
3. IDE connectors (40-1 pin PRI_IDE, SEC_IDE)
This connector supports the provided UltraATA133 IDE hard disk ribbon cable.
Connect the cable’s blue connector to the primary (recommended) or secondary
IDE connector, then connect the gray connector to the UltraATA133 slave device
(hard disk drive) and the black connector to the UltraATA133 master device. It is
recommended that you connect non-UltraATA133 devices to the secondary IDE
connector.
K8V-F
®
K8V-F IDE Connectors
NOTE: Orient the red marking
s
(usually zigzag) on the IDE
ribbon cable to PIN 1.
SEC_IDE
PRI_IDE
PIN 1
PIN 1