Asus MAXIMUSVIEXTREME Computer Hardware User Manual


 
ASUS MAXIMUS VI EXTREME
3-33
Chapter 3
Render Standby [Auto]
Allows you to enable the Intel
®
Graphics Render Standby support to reduce
iGPU power use when the system is idle.
Configuration options: [Auto] [Disabled] [Enabled]
iGPU Multi-Monitor [Disabled]
Allows you to enable both integrated and discrete graphics for multi-monitor
output. The iGPU shared system memory size will be fixed at 64MB.
Configuration options: [Disabled] [Enabled]
NB PCIe Conguration
Allows you to configure the NB PCI Express settings.
PCIE_X16/X8_1 / X16_A2 / X8_B2 / X8_3 / X8_4 Link Speed [Auto]
Allows you to configure the PCIEX16/X8.
Configuration options: [Auto] [Gen1] [Gen2] [Gen3]
PCIEX16_1 Full x16 Bandwidth [Disabled]
Allows you to enable or disable full PCIE x16 bandwidth to PCIEX16_1 slot. When
enabled, all the other PCIe x16 slots are disabled.
Configuration options: [Enabled] [Disabled]
DMI Link ASPM Control [Auto]
Allows you to enable or disable the control of Active State Power Management on SA
side of the DMI Link.
Configuration options: [Auto] [Disabled] [L0s] [L1] [L0sL1]
PEG - ASPM [Disabled]
Allows you to control ASPM support for the PEG device.
Configuration options: [Disabled] [Auto] [ASPM L0s] [ASPM L1] [ASPM L0sL1]
Memory Conguration
Allows you to configure the memory configuration parameters.
Memory Remap [Enabled]
Allows you to enable remapping the memory above 4GB.
Configuration options: [Enabled] [Disabled]