3-12
Chapter 3: BIOS setup
Chapter 3
Load 2x8GB New Hynix 1.80V 2933
Load 4x8GB New Hynix 1.80V 2933 chipset
Load 2GB RAW MHz
Load timing prole for 2GB RAW MHz chipset
Load 4GB/8GB RAW MHz
Load timing prole for 4GB/8GB RAW MHz chipset
Maximus Tweak [Auto]
[Auto] Automatically selects the mode.
[Mode 1] Memory compatibility.
[Mode 2] Overclocking and performance.
Changing the values in this menu may cause the system to become unstable! If this
happens, revert to the default settings.
Primary Timings
DRAM CAS# Latency [Auto]
Conguration options: [Auto] [1] – [31]
DRAM RAS# to CAS# Delay [Auto]
Conguration options: [Auto] [1] – [31]
DRAM RAS# PRE Time [Auto]
Conguration options: [Auto] [1] – [31]
DRAM RAS# ACT Time [Auto]
Conguration options: [Auto] [1] – [63]
DRAM COMMAND Rate [Auto]
Conguration options: [Auto] [1] – [3]
Latency Boundary A [Auto]
Conguration options: [Auto] [1] – [27]
Latency Boundary B [Auto]
Conguration options: [Auto] [1] – [14]
Latency Compensator [Auto]
Conguration options: [Auto] [Enabled] – [Disabled]
Secondary Timings
DRAM RAS# to RAS# Delay [Auto]
Conguration options: [Auto] [1] – [15]
DRAM REF Cycle Time [Auto]
Conguration options: [Auto] [1] – [511]
DRAM Refresh Interval [Auto]
Conguration options: [Auto] [1] – [65535]