![](http://pdfasset.owneriq.net/2/f0/2f0f27bf-faaf-44c3-b3f7-046f7a214087/2f0f27bf-faaf-44c3-b3f7-046f7a214087-bg52.png)
2-14
Chapter 2: Basic Installation
Chapter 2
1. Remove the bolt from the Wi-Fi antenna
connector but leave the washer on the
connector.
Installing the Wi-Fi antenna connector
If you installed a Wi-Fi module on the mPCIe Combo II, you would need to install the Wi-Fi
antenna connector.
To install the Wi-Fi antenna connector:
2. Insert the connector into the I/O shield’s Wi-Fi port hole.
3. Replace the bolt on the connector to secure the antenna connector and the I/O shield
in place.
bolt
bolt
washer
washer