Filter
Top Products
4-7ASUS P1-P5945G/P2-P5945G
Never connect a 1394 cable to the USB connectors. Doing so will
damage the motherboard!
4. USB connector (5-1 pin USB7)
This connector is for USB 2.0 ports. Connect the USB/GAME module
cable to any of these connectors, then install the module to a slot
opening at the back of the system chassis. These USB connectors
comply with USB 2.0 specication that supports up to 480 Mbps
connection speed.
The USB module is purchased separately.
3. CPU Fan connector (3-pin CPU_FAN)
The fan connector support cooling fans of 350 mA~740 mA (8.88 W
max.) or a total of 1 A~2.22 A (26.64 W max.) at +12V. Connect the
fan cable to the fan connector on the motherboard, making sure that
the black wire of each cable matches the ground pin of the connector.
Do not forget to connect the fan cables to the fan connectors.
Insufcient air ow inside the system may damage the motherboard
components. These are not jumpers! Do not place jumper caps on the
fan connectors!
R
CPU FAN Connector
CPU_FAN
GND
+12V
Tachometer
R
USB7 Connector
USB7
GND
USB LP7+
USB LP7-
USBPW78