Asus P1P5945GCBLK Personal Computer User Manual


 
5-5ASUS P1-P5945G/P2-P5945G
5.1.3 ASUS CrashFree BIOS 2 utility
The ASUS CrashFree BIOS 2 is an auto recovery tool that allows you to
restore the BIOS le when it fails or gets corrupted during the updating
process. You can update a corrupted BIOS le using the motherboard
support CD, or the USB Flash that contains the updated BIOS le.
Prepare the motherboard support CD, or the USB Flash containing
the updated motherboard BIOS before using this utility.
Make sure that you rename the original or updated BIOS le in the
USB Flash to P5L8L.ROM.
Recovering the BIOS from a floppy disk
To recover the BIOS from a USB Flash:
1. Turn on the system.
2. Connect the USB Flash to the PC.
3. The utility displays the following message and automatically checks
the USB Flash for the original or updated BIOS le.
Bad BIOS checksum. Starting BIOS recovery...
Checking for oppy...
4. Restart the system after the utility completes the updating process.
Bad BIOS checksum. Starting BIOS recovery...
Checking for oppy...
Floppy found!
Reading le “P5LVM139.ROM”. Completed.
Start ashing...
When found, the utility reads the BIOS le and starts ashing the
corrupted BIOS le.
DO NOT shut down or reset the system while updating the BIOS! Doing
so can cause system boot failure!
If your display monitor is connected to the onboard VGA connector, the
display monitor will turn-off and the system will beep once while the
CrashFree BIOS 2 starts updating your system. The system will beep
once again while the process is nished, and the display will return after
the system restarts.