Asus P2E-M Computer Hardware User Manual


 
ASUS P2E-M User’s Manual 15
III. INSTALLATION
Jumper Settings
1. Real Time Clock (RTC) RAM (R129)
The CMOS RAM is powered by the onboard button cell battery. To clear the
RTC data: (1) Unplug your computer, (2) Short solder points, (3) Turn on your
computer, (4) Hold down <Delete> during bootup and enter BIOS setup to re-
enter user preferences.
RTC RAM R129
Clear CMOS [short solder points momentarily]
P2E-M Clear RTC RAM
R129 (Clear CMOS)
R
2. Keyboard Power Up (KBPWR)
This allows you to disable or enable the keyboard power up function. Set this
jumper to Enable if you wish to use your keyboard (by pressing the spacebar) to
power up your computer. This feature requires an ATX power supply that can
supply at least 300mAmp on the +5VSB lead. The default is set to Disable
because not all computers have the appropriate ATX power supply. Your com-
puter will not power on if you set this to Enable and if you do not have the right
ATX power supply.
Setting KBPWR
Disable [1-2] (default)
Enable [2-3]
P2E-M Keyboard Power Up
Disable
(Default)
KBPWR
KBPWR
123
Enable
123
R
III. INSTALLATION
Jumpers