Asus P4B533-VM Computer Hardware User Manual


 
ASUS P4B533-VM motherboard user guide
4-19
4.4.1 Chip Configuration
The SDRAM parameters (items 2~5) become configurable only when
you set the SDRAM Configuration to [User Defined].
SDRAM CAS Latency [1.5T]
This item controls the latency between the SDRAM read command and
the time the data actually becomes available.
SDRAM RAS to CAS Delay [3T]
This item controls the latency between the DDR SDRAM active command
and the read/write command.
SDRAM Configuration [By SPD]
This parameter allows you to set the optimal timings for items 25,
depending on the memory modules that you are using. The default setting
is [By SPD], which configures items 25 by reading the contents in the
SPD (Serial Presence Detect) device. The EEPROM on the memory
module stores critical information about the module, such as memory type,
size, speed, voltage interface, and module banks.
Configuration options: [User Defined] [By SPD]