Filter
Top Products
ASUS P4S8X motherboard user guide
25
P4S8X
®
P4S8X Internal Line Out Selector
FP_LO_SWL
BLOL
FLOL
BLOR
FLOR
FP_LO_SWR
2. Line out selector (2 x 2 pin FP_LO_SWR, FP_LO_SWL)
(on audio models only)
By default, these jumpers are shorted (jumper caps on) to route the signal
from the audio controller to the rear panel Line Out jack to make it available
for audio out devices like speakers or headphones.
If you connect the Intel Front Panel audio cable to the FP_Audio connector,
(see page 39 for the connector location) remove the caps from these jumpers
to allow automatic switching of audio signals between the rear panel Line
Out jack and the audio cable.
P4S8X
®
P4S8X Keyboard Power Setting
KBPWR
+5V
(Default)
+5VSB
12
32
3. Keyboard Wake Up (3 pin KBPWR)
This allows you to disable or enable the keyboard power up function. Set this
jumper to Enable if you wish to use your keyboard (by pressing <Spacebar>)
to power up your computer. This feature requires an ATX power supply that
can supply at least 300mA on the +5VSB lead. The default is set to Enable.
(The computer will not power ON if you set this to Enable but do not have the
correct ATX power supply. NOTE: This jumper must be set in conjunction
with Wake On PS2 KB/PS2 Mouse/CIR in 4.5.1 Power Up Control.