Filter
Top Products
30
Chapter 2: Hardware information
Some pins are used for connectors or power sources. These are
clearly distinguished from jumpers in the Motherboard Layout. Placing
jumper caps over these connector pins will cause damage to your
motherboard.
9. IDE Activity LED (2-pin IDELED)
This connector supplies power to the hard disk activity LED. The read or
write activities of any device connected to the primary or secondary IDE
connector cause this LED to light up.
P4S8X
®
P4S8X IDE Activity LED
IDE_LED
8. IEEE-1394 Port (Female 1394)
This IEEE-1394 port supports a variety of devices. (see 4.4.2 I/O Device
Configuration).
1394