Filter
Top Products
ASUS P4T-CM User’s Manual 61
4. BIOS SETUP
4. BIOS SETUP
Power Up Control
4.5.1 Power Up Control
AC PWR Loss Restart [Disabled]
This allows you to set whether you want your system to reboot after the
power has been interrupted. [Disabled] leaves your system off and [En-
abled] reboots your system. [Previous State] sets your system back to the
state it is before the power interruption. Configuration options: [Disabled]
[Enabled] [Previous State]
PWR Up On external Modem Act [Disabled]
This allows either settings of [Enabled] or [Disabled] for powering up the
computer when the external modem receives a call while the computer is
in Soft-off mode. NOTE: The computer cannot receive or transmit data
until the computer and applications are fully running. Thus connection can-
not be made on the first try. Turning an external modem off and then back
on while the computer is off causes an initialization string that will also
cause the system to power on. Configuration options: [Disabled] [Enabled]
Wake On LAN or PCI Modem card [Disabled]
Wake-On-LAN or a PCI modem card prermits PC bootup from another
computer via a network by sending a wake-up frame or signal. Configura-
tion options: [Disabled] [Enabled]
Wake On PS2 KB / PS2 Mouse [Disabled]
Wake On PS2 KB / PS2 Mouse permits PC bootup from the keyboard or
mouse. Configuration options: [Disabled] [Enabled]
IMPORTANT: This feature requires an optional network interface with Wake-On-
LAN and an ATX power supply with at least 720mA +5V standby power.