Asus P5GC-MX Network Card User Manual


 
ASUS P5GC-MX 2-23
Boot Graphic Adapter Priority [PCI Express/Int-VGA]
Allows selection of the graphics controller to use as primary boot device.
Conguration options: [Internal VGA] [PCI Express/Int-VGA]
[PCI Express/PCI] [PCI/PCI Express] [PCI/Int-VGA]
Internal Graphics Mode Select [Enabled, 8MB]
Sets the internal graphics mode.
Conguration options: [Disabled] [Enabled, 1MB] [Enabled, 8MB]
Graphics memory type [Auto]
Sets the graphics memory type. Conguration options: [Auto] [DVMT]
[FIX] [DVMT+FIX]
Boot Display Device [Auto]
Conguration options: [Auto] [CRT on Port 0] [LFP on Port 2] [LFP on
Port 3] [DFP on Port 2] [DFP on Port 3] [TV on Port 2] [TV on Port
3] [CRT-Port 0 & CRT-Port 2] [CRT-Port 0 & CRT-Port 3] [CRT-Port 0
& LFP-Port 2] [CRT-Port 0 & LFP-Port 3] [CRT-Port 0 & DFP-Port 2]
[CRT-Port 0 & DFP-Port 3] [DFP-Port 2 & DFP-Port 3]
TV Connector [Auto]
Conguration options: [Auto] [Composite] [Component] [Composite
& Component] [SCART Composite] [SCART Component] [SCART
Compos & Compon] [SCART Compos & Compon RGB] [HDTV Serial]
[HDTV Component] [HDTV Component RGB] [HDTV PnP HDMI]
HDTV Output [Auto]
Conguration options: [Auto] [480i60] [480p60] [576i50] [576p50]
[720p60] [1080i50] [1080i60] [1080p24] [1080p25] [1080p30]
[1080p50] [1080p60]
TV Standard [VBIOS-Default]
Conguration options: [VBIOS-Default] [NTSC] [PAL] [SECAM]
[SMPTE240M] [SMPTE260M] [SMPTE274M] [SMPTE295M]
[SMPTE296M] [SMPTE293M] [SMPTE170M] [ITURBT601]
PEG Buffer Length [Auto]
Sets PCIEX graphics card buffer length. Conguration options: [Auto]
[Long] [Short]
Link Latency [Auto]
Sets link latency. Conguration options: [Auto] [Slow] [Normal]
PEG Root Control [Auto]
Enables, disables or set to Auto of the link latency.
Conguration options: [Auto] [Disabled] [Enabled]