Asus P5KPL-AM SE Computer Hardware User Manual


 
2-2 ASUS P5KPL-AM SE
2.1.2 ASUS EZ Flash 2 utility
ASUS EZ Flash 2 allows you to update the BIOS without having to use a bootable oppy disk
and a DOS-based utility.
Download the latest BIOS le for this motherboard from the ASUS website at
www.asus.com.
To update the BIOS using EZ Flash 2.
1. Insert the USB ash disk that contains the BIOS le to a USB port, then launch EZ
Flash 2 in either of these two ways:
(1) Press
<Alt> + <F2> during POST to display the following:
(2) Enter BIOS setup program. Go to the
Tools menu to select EZ Flash 2 and press
<Enter> to enable it.
Press
<Tab> to switch between drives until the correct BIOS le is found.
2. Select the correct BIOS le then press
<Enter>, EZ Flash 2 updates the BIOS and
automatically reboots the system when done.
This function supports USB ash disks with FAT 32/16 format and single partition only.
DO NOT shut down or reset the system while updating the BIOS to prevent system boot
failure!
ASUSTek EZ Flash 2 BIOS ROM Utility V3.25
Current ROM
Update ROM
A:
Note
FLASH TYPE: MXIC 25L8005
PATH: A:\
BOARD: P5KPL-AM SE
VER: 0309 (H:00 B:01)
DATE: 09/28/2008
BOARD: Unknown
VER: Unknown
DATE: Unknown
[Enter] Select or Load [Tab] Switch [V] Drive Info
[Up/Down/Home/End] Move [B] Backup [ESC] Exit