Filter
Top Products
5-50 Chapter 5: Software support
Creating a RAID 0 or RAID 1 set
To create a RAID set:
1. From the utility menu bar, highlight
Create
on the top.
Marvell BIOS Setup (c) 2006 Marvell Technology, Ltd.
ENTER/SPACE:Select, ESC:Back/Exit
Adapter 2
Arrays Information:
No array is dened!
Disks Information:
ID Port Disk Name Size Speed Status
0 0 SATA: HDS721010KLA330 164.6GB SATA II FREE
4 1 SATA: HDS721010KLA330 82.3GB SATA II FREE
[Adapter] [Create] [Delete]
2. Press <Enter>. The screen shows the disks you can add to make up the
RAID set. Use the arrow key to select a disk and press <Enter> or <Space>
to include this disk in the array.
Marvell BIOS Setup (c) 2006 Marvell Technology, Ltd.
ENTER/SPACE:Select, ESC:Back/Exit
Select free disks to create
ID Port Disk Name Size Speed Status
0 0 SATA: HDS721010KLA330 164.6GB SATA II FREE
4 1 SATA: HDS721010KLA330 82.2GB SATA II FREE
NEXT
[Adapter] [Create] [Delete]
0 0 SATA: HDS721010KLA330 164.6GB SATA II FREE
3. After you have selected the desired disks, select
NEXT
to create array.