Filter
Top Products
2-28 Chapter 2: BIOS setup
The computer cannot receive or transmit data until the computer and
applications are fully running. Thus, connection cannot be made on the
first try. Turning an external modem off and then back on while the
computer is off causes an initialization string that turns the system
power on.
Power On By RTC Alarm [Disabled]
Allows you to enable or disable RTC to generate a wake event. When this
item is set to Enabled, the items RTC Alarm Date, RTC Alarm Hour, RTC
Alarm Minute, and RTC Alarm Second appear with set values. Configuration
options: [Disabled] [Enabled]
RTC Alarm Date [Everyday]
Sets the RTC alarm date. Use the plus (+) or minus (-) keys to adjust
the values. Configuration options: [Everyday] [01] [02] ~ [31]
RTC Alarm Hour [00]
Sets the RTC alarm hour. Use the plus (+) or minus (-) keys to adjust
the values. Configuration options: [00] [01] ~ [23]
RTC Alarm Minute [00]
Sets the RTC alarm minute. Use the plus (+) or minus (-) keys to
adjust the values. Configuration options: [00] [01] ~ [59]
RTC Alarm Second [00]
Sets the RTC alarm second. Use the plus (+) or minus (-) keys to
adjust the values. Configuration options: [00] [01] ~ [59]
Power On By External Modems [Disabled]
This allows either settings of [Enabled] or [Disabled] for powering up the
computer when the external modem receives a call while the computer is in
Soft-off mode. Configuration options: [Disabled] [Enabled]