Filter
Top Products
2-34 Chapter 2: BIOS setup
After you have set a supervisor password, the other items appear to allow
you to change other security settings.
Change User Password
Select this item to set or change the user password. The User Password
item on top of the screen shows the default Not Installed. After you set a
password, this item shows Installed.
To set a User Password:
1. Select the Change User Password item and press <Enter>.
2. On the password box that appears, type a password composed of at
least six letters and/or numbers, then press <Enter>.
3. Confirm the password when prompted.
The message “Password Installed” appears after you set your password
successfully.
To change the user password, follow the same steps as in setting a user
password.
Security Settings
Supervisor Password : Not Installed
User Password : Not Installed
Change Supervisor Password