Filter
Top Products
ASUS P5VDC-MXASUS P5VDC-MX
ASUS P5VDC-MXASUS P5VDC-MX
ASUS P5VDC-MX
1-191-19
1-191-19
1-19
1.7.71.7.7
1.7.71.7.7
1.7.7
Removing a DDR2 DIMMRemoving a DDR2 DIMM
Removing a DDR2 DIMMRemoving a DDR2 DIMM
Removing a DDR2 DIMM
Follow these steps to remove a DIMM.
1. Simultaneously press the retaining
clips outward to unlock the DIMM.
2. Remove the DIMM from the socket.
• A DDR2 DIMM is keyed with a notch so that it fits in only one
direction. Do not force a DIMM into a socket to avoid damaging the
DIMM.
• The DDR2 DIMM sockets do not support DDR DIMMs. Do not install
DDR DIMMs to the DDR2 DIMM sockets.
Support the DIMM lightly
with your fingers when
pressing the retaining
clips. The DIMM might get
damaged when it flips out
with extra force.
DDR2 DIMM notchDDR2 DIMM notch
DDR2 DIMM notchDDR2 DIMM notch
DDR2 DIMM notch
1
2
1
1.7.61.7.6
1.7.61.7.6
1.7.6
Installing a DDR2 DIMM(yellow slots)Installing a DDR2 DIMM(yellow slots)
Installing a DDR2 DIMM(yellow slots)Installing a DDR2 DIMM(yellow slots)
Installing a DDR2 DIMM(yellow slots)
Unplug the power supply before adding or removing DIMMs or other
system components. Failure to do so can cause severe damage to both
the motherboard and the components.
To install a DIMM:
1. Unlock a DIMM socket by
pressing the retaining
clips outward.
2. Align a DIMM on the
socket such that the
notch on the DIMM
matches the break on the
socket.
3. Firmly insert the DIMM
into the socket until the
retaining clips snap back
in place and the DIMM is
properly seated.
Unlocked retainingUnlocked retaining
Unlocked retainingUnlocked retaining
Unlocked retaining
DDR2 DIMMDDR2 DIMM
DDR2 DIMMDDR2 DIMM
DDR2 DIMM
1
2
3