Filter
Top Products
4-34 Chapter 4: BIOS setup
4.5.4 ACPI APIC Support [Enabled]
Allows you to enable or disable the Advanced Conguration and Power
Interface (ACPI) support in the Advanced Programmable Interrupt Controller
(APIC). When set to Enabled, the ACPI APIC table pointer is included in the
RSDT pointer list. Conguration options: [Disabled] [Enabled]
4.5.5 APM Configuration
APM Conguration
Power Button Mode [On/Off]
Restore on AC Power Loss [Power Off]
Power On By RTC Alarm [Disabled]
Power On By External Modems [Disabled]
Power On By PCI Devices [Disabled]
Power On By PCIE Devices [Disabled]
Power On By PS/2 Keyboard [Disabled]
Power On By PS/2 Mouse [Disabled]
Go into On/Off or
Suspend when Power
button is pressed.
Power Button Mode [On/Off]
Allows the system to go into On/Off mode or suspend mode when the
power button is pressed. Conguration options: [On/Off] [Suspend]
Restore on AC Power Loss [Power Off]
When set to Power Off, the system goes into off state after an AC power
loss. When set to Power On, the system goes on after an AC power loss.
When set to Last State, the system goes into either off or on state,
whatever the system state was before the AC power loss.
Conguration options: [Power Off] [Power On] [Last State]
Power On By RTC Alarm [Disabled]
Allows you to enable or disable RTC to generate a wake event.
Conguration options: [Disabled] [Enabled]
The succeeding items appear when the Power On By RTC Alarm item is
set to [Enabled].
RTC Alarm Date [XX]
To set the alarm date, highlight this item and press the <+> or <->
key to make the selection. Conguration options: [Everyday] [1] [2]
[3]... ~ [31]