Filter
Top Products
ASUS PR-DLSW motherboard user guide
5-25
For DOS System Users:
Under this section, you have two choices.
1. Use a utility that will copy the raw dd image onto a 1.44MB floppy
disk. This dd image is located at:
\Drivers\Sdms\Drivers\UNIXES\SOLARIS\Solaris7\SYMITU.DD
RAWRITE3.COM, which is a public domain utility, is available on this
CD-ROM at this location:
\Drivers\Sdms\Drivers\UNIXES \RAWRITE3.COM
Instructions for using this utility are included in its accompanying
RaWrite file or as a Microsoft Word document located at:
\Drivers\Sdms\Drivers\UNIXES \RAWRITE3.DOC
2. The other DOS alternative is to use the self-extracting image file that
is located at:
\Drivers\Sdms\Diskimag\Solaris7.exe
B. New System Installation
These instructions provide details to install the SDMS symhisl driver using
the SYMHISL Update diskette created above during installation of the
operating system using the LSI 53C1010R/53C1030 controller. To use the
driver on the SYMHISL Driver Update diskette to install Solaris X86 (Intel
Platform Edition) on a machine, follow the steps below.
1. Insert the Solaris Device Configuration Assistant Diskette into your
machine’s diskette drive. Also insert the Solaris Installation CD-ROM;
or for network installation, verify with your system administrator that
the Solaris Network Installation image is available on your network.
2. Turn on your machine. When the Solaris Device Configuration
Assistant screen appears, choose F4_Add Driver. The message
“Enumerating buses...” appears. Then, the Install Driver Update
screen appears.
3. Remove the Solaris Device Configuration Assistant Diskette from the
diskette drive and insert the first Solaris Driver ITU diskette you want.
4. Press F2_Continue. The Select Solaris System Version screen
appears.